Throughout the Las Vegas, NV valley – from Henderson, NV’s Green Valley, Sun City, Anthem, Seven Hills, Silverado Ranch & Lake Las Vegas; Dragon’s Ridge, Queens Ridge, Summerlin, Mt. Charleston & Centennial Hills; to North Las Vegas, NV’s Aliante & Eldorado Ranch, you want a professional, licensed painting contractor who will deliver a high quality paint job despite any challenges that may arise during the construction process.
"I had called the last minute for an interior painter, because I had flown into town for just 5 days, to get my home painted. PPP Paint Services made time for me. Made an appointment on a Monday and they were there by Thursday and done by Friday. 9 rooms including trim work. The job came out great, and at a great value. I would highly recommend this company."
Interior painting, exterior painting, residential painting, commercial painting, plaster repair, drywall repair and installation, handyman projects, condo painting, townhouse painting, stucco ceiling flattening, wallpaper installation, wallpaper removal, kitchen cabinet painting, kitchen cabinet spraying, staircase painting, staircase staining, carpentry, crown moulding installation, trim installations, custom carpentry solutions, exterior wood repair, colour consultations, aluminum siding painting, brick painting, deck staining, fence painting, exterior caulking, interior caulking, storefront painting, office painting, home renovations.
When coverage is difficult to estimate, add more rather than less. You can always pour the leftover back into cans. For large jobs, use the bucket and a roller screen rather than a roller tray. It’s much faster to load your roller with the screen than to use a roller pan. Simply dunk the roller into the paint bucket, then roll it along the screen until it stops dripping.
Before the scrubdown, protect nearby plants by misting their leaves and saturating the surrounding soil with water, pulling them away from the house, and shrouding them in fabric drop cloths. (Plants will cook under plastic.) Lay more drop cloths along the base of the walls to collect any falling paint debris. Walls should be wet down before getting scrubbed, then washed with a gallon of water mixed with 1 cup chlorine bleach and 1 cup of either a concentrated, phosphate-free cleaner, such as a trisodium phosphate (TSP) substitute, or Jomax House Cleaner. Working in sections, from the bottom to the top, will avoid streaks. Be sure to rinse walls well before the solution dries. Wood siding and trim should be ready to paint after a day or two of dry weather.
The total amount the customer pays you, minus all of your expenses is what you are left with – this is your pay. We don’t care about the initial startup expenses, we care about the expenses per job. These costs per job include the materials, the labor, and any other other non-reusable materials you use on the job. It could also include any marketing expenses you incurred to get this customer.
A professional painter will help you select an exterior paint designed for long-lasting results, superior protection, and ample coverage. Higher quality paint requires fewer coats and lasts far longer, saving you money down the road. Oil or latex paints in a flat/matte or satin finish make excellent choices for the exterior of your home. These paints will endure extreme weather conditions, can be customized to your specific climate, and are ideal for painting siding.
The perfect roller would hold a roomful of paint, leave the right amount of texture, wouldn't spray or fuzz, and would be easy to clean. Until somebody invents the ideal one, follow these tips to choose the right roller. "The longer the nap, the more paint the roller will hold, but it will also create more texture." says Dixon. "A 1/2-inch nap lamb's-wool roller holds plenty of paint without too much texture," says Dixon. "Less expensive rollers can work," says Span. "Just wash them first in dishwashing liquid to remove any stray fibers." Most of the pros we spoke with prefer 9-inch rollers over 18-inch models -- they are lighter, cheaper, and easier to use. Despite these shortcomings, Maceyunas swears by the wider roller. "The roller can do a whole wall in a few up and down strokes instead of in several dozen W and M strokes," he says.
When the workers came they took care of all the stuff I'd seen other reviewers mention, removing old phone lines, some stucco work, but one thing I didn't expect is that one of my awnings had some dry rot that I'd planned to get fixed. There was slight language barrier but the workers took it into their own hands to saw off and repair the awning before painting it. Wow!
Use a roller to paint the rest of the wall. A good method to use is the 'W method'. You start by painting a large 3 foot (0.91 m) square W on the wall. Then, without lifting the roller, you fill in the W. You can paint a wall section-by-section, and do the walls one at a time for best results. It's generally a good idea to use an extension pole for your roller instead of standing on a ladder. Make sure that neither the extension pole nor the roller has plastic handles, as plastic handles are flexible and this makes it difficult to control the painting.
I called several other painters to get estimates as well, always checking that the reviews were not fake (Like all 5 star reviews grouped within a month of each other, as if they had all their friends give them great reviews). I also checked with the California Contractors board to verify current Licences and if in fact the painters were working under their own license or working under some random contractor's license that wasn't even a painters license, (Some had no license at all!), I checked to see if the companies I interviewed were listed with the BBB, and if they were, if they had any unresolved claims against them.
If the point of hiring a well established, experienced, reputable painting contractor is to secure the professionalism and trust suggested to be inherent with that choice, then I would EXPECT that professionalism and experience to include the ability to make the proper and correct calculations for labor and materials for a fixed price quote, and there should be NO reason for the contractor to put the cost burden of their miscalculation on the consumer.
So why not just paint your own home. I'm not a painter, so my wife and I take our time, buying the paint and supplies, and doing our own painting. Yes, we need to tape, and it's not perfect, but we get the satisfaction of seeing our completed work. Get the supplies, sliders for your furniture, and patience and go for it. That way YOU have control over the entire project.
Color is always the first consideration when painting a home. Most paint manufacturers offer samples to try that can allow you to make a more informed decision. Because light within a room may vary from wall to wall as well as from day to night, try painting a large piece of poster board in the color or colors you are considering. Move the board from wall to wall and look at it for a minimum of 24 hours at a time in each space to make sure you like the color before committing.
"Cutting in is an acquired skill, but it's something you can't do at all with a ratty brush," says Doherty. When cutting in on a wall, he loads his brush and spreads out the excess paint, then works the brush up to the line between wall and ceiling. A brush stroke that's too wide creates a hatband, or smooth brushed band, on the very top of the wall where it meets the ceiling. To avoid this, Dixon recommends rolling first and then cutting in with a brush. "A good roller can get within 1/2 inch of the ceiling," he says. "You'll save time by not brushing more then you have to." When painting baseboards, "a wide taping knife makes a good paint guard," says Span. "Just keep the blade clean to prevent drips from working around the edge of the knife."
To paint a large section without leaving lap marks, roll the nearly dry roller in different directions along the dry edge, feathering out the paint as you go. After completing the entire length of the wall or ceiling, move to the next section and paint over the feathered edges. For the second coat, apply the paint in the opposite direction. This crisscrossing paint application sharply reduces (if not eliminates) lap marks.
Primers aren't just diluted paint. They're formulated to establish a solid, even base, seal stains and ensure that the topcoats of paint go on smoothly and bond securely to the surface. "Most homeowners use latex primers, but the pros stick to alcohol and alkyd primers because they'll cover almost anything," says John Weeks, of John the Painter in Mobile, Alabama. Primer can affect the appearance of the topcoat. "It's okay to spot-prime the ceilings but not the walls, because primed spots will show," adds Span.
Linda Smith, the former Linda Brown, stands in front of the Sumner School in Topeka, Kan., on May 8, 1964. The refusal of the public school to admit Brown in 1951, then age 9, because she is black led to the Brown v. Board of Education court case. In 1954, the U.S. Supreme Court overruled the "separate but equal" clause and mandated that schools nationwide must be desegregated. Brown, the Kansas girl at the center of the 1954 U.S. Supreme Court ruling that struck down racial segregation in schools, has died at age 76. Peaceful Rest Funeral Chapel of Topeka confirmed that Linda Brown died Sunday, March 25, 2018. AP
If you're going to do any part of the painting or prep work on your own, you must know that the first step in preparing a surface is washing it. Since dirt can affect the smoothness of a surface area -- and therefore paint's adhesion to it -- use soap to remove any dirt or stains. Make sure there's no soap left on the walls when you're finished; also make sure to remove any gloss with sandpaper and vacuum up the leftover dust.
Even an old lamp with a bare bulb held close to a wall will make minor cracks, bumps or nail pops jump out. Carmen Toto, owner of C. Toto & Sons in Madison, New Jersey, uses painter's putty or a lightweight spackle for minor cracks and dents; he uses plaster of Paris for dents deeper than 1/8 inch. Instead of the standard tape-and-spackle method for bridging over recurring stress cracks, Maceyunas uses a rubberized spray-on primer called Good-Bye Crack. Damaged wood requires a slightly different approach. "Don't use spackle on wood," says Toto, "because it just won't stick." For damaged trim, he uses painter's putty or a two-part wood filler, such as Minwax's High Performance Filler. Smooth any repairs, bumps, and nibs with a drywall pole sander. For smoother walls and better adhesion, some of our pros sand all previously painted walls regardless of the shape they're in.
I did go with the highest bidder and it did not matter. They did a shoddy job and threatened to take me to court when I pointed out mistakes that they made based on their work standards stated on the quote. I have not paid them yet, just filed a complaint with the BBB. No money down asked, no contract signed. The boss stated I have to high of expectations just because I live in a 121 year old house!
Even if you think you'll probably do the job yourself, it's good preparation to seek estimates from professional home painters, whether your painting the exterior or interior of your home. Then you'll have a financial point of comparison and you may benefit from what a home painting contractor has to say about the condition of your home, color choices and types of paint available. Let the painter make his pitch for a professional job before you decide what to do. You can still opt to do it yourself while having learned something worthwhile.
A fellow (actually lives in the same neighborhood) by the name of Wayne Hickey (843-655-0366) painted the ceilings and most of the walls of our house in February 2017. He got paint all over my light fixtures, all over my trim around the doors, and had visible lap marks everywhere on the walls. He came back and rectified some of the problems, but not all, as I have noticed as I have had time to look more carefully at the work he and his assistant did. His assistant had no idea (not a clue) how to roll paint on a wall or ceiling. Some places were not covered. He said he would pull nails for pictures and then re-insert the nails exactly where they were. This he did not do as he promised. He painted over the nails. His assistant had no idea how to use a paint roller. I have painted all my life, and would have done this work myself, but I just had a full knee replacement and the other knee is in bad shape. I just could not do the work. Wayne is a pleasant and congenial individual, but he can not cut in a ceiling or wall to my satisfaction - not even close. He should have a putty knife and wet cloth with him all the time to correct any paint that might get applied where it shouldn't. That is something I always did as a painter. I would not recommend Wayne to paint anybody's home.
My husband has been a professional painter over 30 years. He prides himself in his high level of work ethic and customer satisfaction. He stays up to date on techniques and finishes. He gives Very detail and accurate appraisals with contracts. At an alarming rate, as he starts to finish the last day or the day before, the client starts nit picking and being disrespectful towards his work when every day prior to that, they were very pleased, as he request ongoing satisfaction throughout the job. Then they don't to want pay remaining balance, bicker about final cost, or stop payment. He has a crew he has to pay whether the customer does or doesn't honor the contract as well as our own household expenses. Wasted time ,labor, money and effort lost. Now how do we fix this? Remind yourself and clients that a contract is based on honor.
Keep an eye on the new cans as they're being brought in. Make sure they look new and don't have paint in the rim of the can. If it's a five-gallon bucket, check to see whether the lid is still sealed on with the plastic strip. The only time it's acceptable to mix water in the paint is when you're using a deep or ultra deep base paint to reduce its stickiness, which is rare with new paint technology. Dark primary colors are composed almost entirely of tint that makes it very hard to work with without adding water.
You can use the spray cleaner while working from a ladder -- although scaffolding is better -- but practice at ground level first; the force of the spray against the house could knock you off a ladder if you're not careful. Some of these machines come with separate containers you can fill with cleaning solutions or anti-mildew solutions. Sprayers are so powerful that ordinarily you probably won't need to use a cleaning solution; if you do, remember to rinse the surface with clean water afterward.
With homeownership the family aspiration, Dad, a housepainter, always sought opportunities to work overtime. — Bill Cummings, BostonGlobe.com, "Dad taught me the art of negotiating when I was just a kid," 24 May 2018 At the outset, a Hanson housepainter embodies the relationship between three-dimensional art and life, fact and fiction. — Karen Wilkin, WSJ, "A Morbid, Engaging Body of Work," 26 Mar. 2018 Rosenthal was the youngest of six children of a Bronx housepainter who emigrated from Belarus. — Alex S. Jones, Town & Country, "Will the Rivalry Between the Washington Post and New York Times Save Journalism?," 9 Aug. 2017
Exterior painting should do more than just look nice. When done correctly, your fresh paint should help protect the rest of your home. From assisting in insulating your home from the sun’s rays to filling in cracks and sealing them, exterior home painting is one of the best steps in maintenance you can make for your house. Realtors will tell you that painting your house is a sure way to add value and curb appeal!
A painter's rod, or pole, can help you paint ceilings more quickly — no climbing up and down ladders required. And there's no need to stand directly underneath the area you are painting, so you won't catch every wayward splatter. A pole is also great for walls and floors. The pros were split over whether the 4- or 8-foot pole is best for everyday use, but they all agreed that a telescoping rod is the best bet.
FIRST: Unless you can stay in business painting 1 bedroom at a time for $500-$1000, which you can't, then you will be taking on several thousand dollar contracts that require thousands in Labor and Materials to fulfill the order. Multiply that by 3-4 jobs at one time or in our case 15-20 jobs at a time, YOU NEED TO TAKE DEPOSITS!!! It is horrible business not to take deposits. There are many jobs where its not possible to get a deposit and that is built into or pricing accordingly. If we are not getting a deposit, there is a finance charge built in, contractors are not banks. If you don't have a good feeling about a deposit, your hiring the WRONG CONTRACTOR. Hire people you know or well established businesses.
After getting more than 5 estimates to get our exterior home painted, we chose this company. It all started when we had James Lee, the owner, present us with a packet when we first met for the estimate with copies of contractors license, insurance, and addresses of his interior/exterior painting jobs. The estimate was very affordable. The 2 workers did an excellent job from start to finish. The job took an estimated 5 days to complete and they cleaned up after themselves every day. This company deserves another 5 Stars from us! Our neighbors will be calling you since they loved the painting job! Great job James! Thank you!
You won’t believe how quickly house painting can totally transform your home. Repainting the outside of your house will give it a new glow that your neighbors will envy. Switching up the colors inside your home will bring a new life into the environment. And while we can’t help you organize and clean up every room in your house, we promise we’ll clean up after ourselves. One less thing you have to worry about, right?
To maintain a wet edge, start near a corner and run the roller up and down the full height of the wall, moving over slightly with each stroke. Move backward where necessary to even out thick spots or runs. Don’t let the roller become nearly dry; reload it often so that it’s always at least half loaded. Keep the open side of the roller frame facing the area that’s already painted. That puts less pressure on the open side of the roller, so you’re less likely to leave paint ridges